 |
Product Data Sheets |
MicroMed MM-5kV Portable Electrosurgical
Instrument Insulation Detector |
| McGan Technology’s MicroMed MM-5kV
electrosurgical insulation defect detector is a compact, hand
held, battery operated unit that is used to detect and locate
defects such as pinholes, cracks and bare spots in protective
coatings applied over conductive instrument’s surfaces.
|
|
|
Applications:
Insulation defect testing of electorsurgical probes and cables
- Laparoscopic
- Endoscopic
- Intra-operative instruments
- Monopolar and bipolar surgical devices
Checks both disposable and reusable instruments
Compliance:
- ANSI/AWWA C213-94
- UL (Optional Power Adaptor)
- CE marking in accordance with EMC Directive 89/336
- JIS G-3491, JIS G-3492
Features:
- LED voltage indicator
- Voltage control up and down buttons
- Visual and audible alarm indicator
- On Switch
- Off Switch
- Adjustable from 0 to 5 kV
- Ground wire with alligator clip
- Design incorporates 9 Volt battery
- High voltage long lead wire (optional)
- Battery pack and charging adaptor (optional)
|
Features:
- Light weight portable unit
- Reusable / Interchangeable Brush or Ring electrode
- Simple operation, easy to read LED indicators
- Maintains applied test voltage with constant current
source
- Full test current at low voltages.
- Limited Output current for operator safety
- LED displays alarm and battery charge
Voltage:
- Fully adjustable voltage selection from 0-5 kV DC
Typical Test Voltages:
- Bipolar Micro: 0.4 kV DC
- Bipolar Standard: 2.5 kV DC
- Monopolar: 4.2 kV DC
|
Specifications:
|
|
1.1 lbs (460 grams) |
|
LED |
|
0 to 5kV adjustable |
|
10V |
|
< 0.1mA at probe |
|
Test current 0.1mA max |
|
9 volt battery or optional |
|
12V external rechargeable battery with Adaptor |
|
8.27 x 2.95 x 1.38 inches
210 x 75 x 35mm |
|
Audible and Visual |
|
- Detector base unit
- 9V battery
- 6ft (2m) ground lead with clamp
- 0.31inch (8mm) wide brass wire brush electrode
- Ring Electrode with brass wire
- Carrying case
- Standard Operating Instruction manual
- Quick Operation Guide
* not including brush or ring dimensions
|
Components |
MicroMed PD-8K Kit includes:
1. Base Unit
2. Ground (Green) wire with Alligator clip
3. Ring and Brush Electrode
OPTIONAL
4. HV (Red) wire with Yellow Handle and Red port
5. Rechargeable Battery
6. AC Battery Charger
* Product specifications are subject
to change without notice. Contact Sales
to get the latest product information.
:: MicroMed MM-5kV Product
Data Sheet (PDF)
[more]
|
Click here
for a printer-friendly version of this page.
|
