 |
Product Data Sheets |
Electrosurgical Instrument Insulation Detector |
McGan Technology’s
MicroMed PD-8K electrosurgical insulation defect detector
is a compact, battery operated unit that is used to
detect and locate defects such as pinholes and cracks
in protective coatings applied over conductive instrument’s
surfaces. |
 |
|
Applications:
- Insulation defect testing of electorsurgical
probes and cables
- Laparoscopic
- Endoscopic
- Intra-operative
- Monopolar and bipolar surgical units
- Checks both disposable and reusable instruments
Compliance:
- ANSI/AWWA C213-94
- UL (Power transformer)
- CE marking in accordance with EMC Directive 89/336
- JIS G-3491, JIS G-3492
Controls:
- LCD Display
- Voltage control
- Visual and audible alarm indicator with sensitivity
control
- On Switch
- Off/Test Switch (momentary-on)
- High voltage probe connector
- 1.6A slow blow fuse (5x20mm)
- Ground port
- Charge connection (allows operation while charging)
- Slip-on battery pack
|
Features:
- Design incorporates portable battery
- Fully charges in 10 hours (overcharge protection)
- Operational during battery re-charging
- Simple operation, easy to read LCD display
- Maintains applied test voltage with constant
current source
- Full test current at low voltages. Alarm sensitivity
control
- Limited Output current for operator safety
- Regulated DC output, adjustable from 0 to 8 kV
- LCD displays applied voltage and battery charge
Voltage:
- Fully adjustable voltage selection from 0-8 kV
DC
Typical Test Voltages:
- Bipolar Micro: 0.4 kV DC
- Bipolar Standard: 2.5 kV DC
- Monopolar: 4.2 kV DC
|
|
Specifications: |
|
2.2kg (4.85 lbs) |
|
LCD |
|
0 to 8kV adjustable |
|
10V |
|
< 0.1mA at probe |
|
Test current 0.1mA max |
|
GellCell 1.5mA max |
|
260 x 160 x 70mm
10.25 x 6.3 x 2.75 inches |
|
Audible and Visual |
|
MicroMed PD-8K KIT includes:
- Detector
- 10 hour battery with re-charger
- Probe handle with 2m (6ft) lead
- 2m (6ft) lead ground with clamp
- 8mm (0.31inch) wide brass wire brush electrode
- Ring Electrode with brass wire
- Carrying case
- Standard Operating Instruction manual
- Quick Operation Guide
|
|
Components: |
1. Base Unit
2. HV (Red) wire with Yellow Handle and Red port
3. Ground (Green) wire with Alligator clip and Green port
4. Rechargeable Battery
5. Battery Recharging Port
6. Battery Charger
7. Voltage Knob
8. Alarm sensitivity Knob
9. On/Off button
10. LED Alarm
11. LCD high-voltage display |
|
Click here
for a printer-friendly version of this page. |
